The M66 hydraulic starter motor is capable of producing a maximum torque of 216 Nm at 3000 psi (207 bar). The M66 is also fully cast iron (including the flange and pinion housing), making it suitable for all environments and resistant to damage.
The M66 is fitted with a heavy duty inertia bendix and pinions which are machined from one cast block. This eliminates the process of pressing the pinion onto the bendix cup. A common method used by other starter motors and is a known fail point in many applications.
Depending on your application, the M66 hydraulic starter motor can be fitted with either a steel or beryllium copper pinion. If the environment is potentially hazardous a beryllium copper pinion helps to reduce the risk of sparks.
|Weight||21.5 kg (47.4 lbs)|
|Construction||Cast iron (ductile iron)|
|Max. working press.||21 MPa (3000 psi)|
|Fluid media||Mineral oil|
|Viscosity range||ISO 32 to 46 (SUS 140-230)|
|Temperature range||-40°C to +100°C (-40°F to +212°F)|
|Speed range||0-3000 rpm|
|Rotation||CW – Standard (CCW – Optional)|
|Overall volumetric efficiency||95% (minimum)|
|Max. torque at 21 MPa
|Overall length||435mm (17.1″)|
|Max. motor length||328mm (12.9″)|
|Motor diameter||130mm (5.1″)|
|Dist. between ports||65mm (2.6″)|
|Inlet port||SAE 12|
|Outlet port||SAE 12|
|Flange thickness||21mm (0.83″)|
|Pinion hsg. Length||113mm (4.5″)|
|Mounting flange||SAE 3|
|Flange to ring gear (FRG)||50.8mm (2″)|